forked from YujinChu/AWX_collector
dummy
This commit is contained in:
YujinChu
parent
dec65d35de
commit
edd1801581
|
|
@ -13,7 +13,7 @@ import paho.mqtt.client as mqtt
|
|||
import numpy as np
|
||||
from multiprocessing import shared_memory
|
||||
import argparse
|
||||
|
||||
import random
|
||||
|
||||
'''
|
||||
전달해야할 데이터 들
|
||||
|
|
@ -85,7 +85,7 @@ b[:] = a[:]
|
|||
###############################################################################
|
||||
|
||||
#MQTT_TOPIC = info['mqtt']['topic']
|
||||
MQTT_TOPIC = dev_info['assetcode']
|
||||
MQTT_TOPIC = f"/device-data/{dev_info['assetcode']}"
|
||||
MQTT_ID = info['mqtt']['id']
|
||||
MQTT_PW = info['mqtt']['pw']
|
||||
MQTT_HOST_IP = info['mqtt']['host_ip']
|
||||
|
|
@ -165,8 +165,11 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
prev_a_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
prev_b_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
|
||||
ai_array = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
random_index = random.randint(0, len(my_array) -1)
|
||||
ai_array = [random.randint(1,50000) for _ in range(16)]
|
||||
#value list on -> do control data
|
||||
#추후에 do power on 할 리스트는 어디선가 읽어서 와야 해요
|
||||
#추<EFBFBD><EFBFBD>에 do power on 할 리스트는 어디선가 읽어서 와야 해요
|
||||
#do1 do2 나눠야 해요
|
||||
|
||||
|
||||
|
|
@ -185,7 +188,7 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
-> 데이터를 어떻게 할 것이냐
|
||||
-> 이전 데이터가 있다면, 이전 데이터를 가지고 더미 데이터로 사용하는 방법 => 안하기로 했었음
|
||||
'''
|
||||
timenow_a = int(time.time()*1000)
|
||||
timenow = int(time.time()*1000)
|
||||
isSuccess = True
|
||||
|
||||
# PORT A
|
||||
|
|
@ -197,7 +200,7 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_a_ai = a_ai_data
|
||||
prev_a_ai = ai_array
|
||||
|
||||
try:
|
||||
port_A_DO.write_bits(0, port_a_do_value)
|
||||
|
|
@ -205,18 +208,17 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
except:
|
||||
None
|
||||
|
||||
timenow_b = int(time.time()*1000)
|
||||
# PORT B
|
||||
port_b_do_value = list(b[17:32])
|
||||
try:
|
||||
b_ai_data=port_B_AI.read_registers(0x32, 32)
|
||||
prev_b_ai = b_ai_data
|
||||
prev_b_ai = ai_array
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_b_ai = b_ai_data
|
||||
prev_b_ai = ai_array
|
||||
|
||||
try:
|
||||
port_B_DO.write_bits(0, port_b_do_value)
|
||||
|
|
@ -225,11 +227,11 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
None
|
||||
|
||||
if isSuccess:
|
||||
queue_a.put([timenow_a,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([timenow_b,prev_b_ai, port_b_do_value])
|
||||
queue_a.put([timenow,ai_array, port_a_do_value])
|
||||
queue_b.put([timenow,ai_array, port_b_do_value])
|
||||
else:
|
||||
queue_a.put([0,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([0,prev_b_ai, port_b_do_value])
|
||||
queue_a.put([0,ai_array, port_a_do_value])
|
||||
queue_b.put([0,ai_array, port_b_do_value])
|
||||
|
||||
|
||||
|
||||
|
|
@ -262,7 +264,7 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
}
|
||||
lists.append(data_for_list)
|
||||
### 여기서 보냄
|
||||
# 10번 시그널 받으면
|
||||
# 10번 시그널 <EFBFBD>으면
|
||||
#
|
||||
# list mqtt send
|
||||
# list clear
|
||||
|
|
@ -283,6 +285,10 @@ def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port
|
|||
# time.sleep(1)
|
||||
'''
|
||||
|
||||
###############################################################################
|
||||
# dummy data thread #
|
||||
###############################################################################
|
||||
|
||||
|
||||
###############################################################################
|
||||
# data process thread #
|
||||
|
|
@ -373,8 +379,8 @@ def data_process_thread(data_queue, ch, chamber):
|
|||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"channel": ch, # 채널 입력 <EFBFBD>자
|
||||
"chamber":chamber, #chamber 도 입력 <EFBFBD>자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_1
|
||||
}
|
||||
|
|
@ -387,8 +393,8 @@ def data_process_thread(data_queue, ch, chamber):
|
|||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"channel": ch, # 채널 입력 <EFBFBD>자
|
||||
"chamber":chamber, #chamber 도 입력 <EFBFBD>자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_2
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,493 @@
|
|||
|
||||
import threading
|
||||
import time
|
||||
import logging
|
||||
import serial
|
||||
import minimalmodbus
|
||||
import serial.rs485
|
||||
import subprocess
|
||||
import json
|
||||
import yaml
|
||||
import queue
|
||||
import paho.mqtt.client as mqtt
|
||||
import numpy as np
|
||||
from multiprocessing import shared_memory
|
||||
import argparse
|
||||
|
||||
|
||||
'''
|
||||
전달해야할 데이터 들
|
||||
mes code | 상태 | 전압 | 전류 | 4pin (DO) | ER1 | ER2
|
||||
tube 번호| 상태 | volt | curr | do | cnt | cnt
|
||||
|
||||
tube 번호: 1 - 128 , chamber / slot
|
||||
- slot(n) - tube(n)
|
||||
- 1-1 ~ 8-16 : 128개다
|
||||
|
||||
상태: 정상이냐, 초기화, 불량
|
||||
|
||||
ER1: 1초동안 판별, 판별할 동안 counting 할 예정 2V 이하라면 CNT UP
|
||||
if) er: 10이 되었음 (1초 유지) -> 0으로 변환, ER2 cnt up
|
||||
if) 2v 이상인 경우가 발생했다 -> 0으로 변환
|
||||
|
||||
ER2: OFF 횟수
|
||||
|
||||
'''
|
||||
|
||||
parser = argparse.ArgumentParser()
|
||||
parser.add_argument('-config',help='')
|
||||
args = parser.parse_args()
|
||||
|
||||
ROOT_PATH = f"/usr/local/sdt/app/{args.config}"
|
||||
DEVICE_PATH = f"/etc/sdt/device-control"
|
||||
|
||||
###############################################################################
|
||||
# JSON FILE READ #
|
||||
###############################################################################
|
||||
|
||||
with open(f"{ROOT_PATH}/connect_info.json","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
info = json.load(f)
|
||||
|
||||
with open(f"{DEVICE_PATH}/config.yaml","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
dev_info = yaml.load(f, Loader=yaml.FullLoader)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Shared memory setting #
|
||||
###############################################################################
|
||||
|
||||
|
||||
|
||||
with open(f"{ROOT_PATH}/config.json","r") as f:
|
||||
#with open(f"{args.config}/config.json","r") as f:
|
||||
data = json.load(f)
|
||||
|
||||
print(data)
|
||||
print(data["1"])
|
||||
|
||||
a = [ data[str(n+1)] for n in range(64)]
|
||||
a = np.array(a)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Get Data from Shared Memory #
|
||||
###############################################################################
|
||||
|
||||
shm = shared_memory.SharedMemory(create=True, size=a.nbytes, name="DO-shm")
|
||||
b = np.ndarray(a.shape, dtype=a.dtype, buffer=shm.buf)
|
||||
b[:] = a[:]
|
||||
|
||||
|
||||
###############################################################################
|
||||
# MQTT Broker Setting #
|
||||
###############################################################################
|
||||
|
||||
#MQTT_TOPIC = info['mqtt']['topic']
|
||||
MQTT_TOPIC = dev_info['assetcode']
|
||||
MQTT_ID = info['mqtt']['id']
|
||||
MQTT_PW = info['mqtt']['pw']
|
||||
MQTT_HOST_IP = info['mqtt']['host_ip']
|
||||
MQTT_PORT = info['mqtt']['port']
|
||||
|
||||
|
||||
def publish_json_message(client, data):
|
||||
topic = MQTT_TOPIC
|
||||
client.publish(topic, payload=data)
|
||||
|
||||
|
||||
client = mqtt.Client("python_pub")
|
||||
client.username_pw_set(MQTT_ID, MQTT_PW)
|
||||
client.connect(host=MQTT_HOST_IP,port=MQTT_PORT)
|
||||
|
||||
client.loop(2) # timeout = 2초
|
||||
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial setting #
|
||||
###############################################################################
|
||||
|
||||
_serial_port3 = serial.Serial("/dev/ttyMAX2", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port3.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port4 = serial.Serial("/dev/ttyMAX3", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port4.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial thread #
|
||||
###############################################################################
|
||||
isThreadRun = True
|
||||
|
||||
def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port_b_do_id, queue_a, queue_b):
|
||||
|
||||
print("index: ", chip_index)
|
||||
print("a-ai: %d, a-do: %d, b-ai: %d, b-do: %d " % (port_a_ai_id, port_a_do_id, port_b_ai_id, port_b_do_id))
|
||||
if chip_index == 0:
|
||||
serial_dev1 = "/dev/ttyMAX1"
|
||||
serial_dev2 = "/dev/ttyMAX0"
|
||||
else:
|
||||
serial_dev1 = "/dev/ttyMAX2"
|
||||
serial_dev2 = "/dev/ttyMAX3"
|
||||
|
||||
print(serial_dev1)
|
||||
print(serial_dev2)
|
||||
_serial_port_A = serial.Serial(serial_dev1, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_A.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port_B = serial.Serial(serial_dev2, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_B.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
port_A_AI = minimalmodbus.Instrument(serial_dev1, port_a_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_A_DO = minimalmodbus.Instrument(serial_dev1, port_a_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_AI = minimalmodbus.Instrument(serial_dev2, port_b_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_DO = minimalmodbus.Instrument(serial_dev2, port_b_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
|
||||
while isThreadRun:
|
||||
evt.wait()
|
||||
#print("read thread get even")
|
||||
evt.clear()
|
||||
|
||||
prev_a_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
prev_b_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
|
||||
#value list on -> do control data
|
||||
#추후에 do power on 할 리스트는 어디선가 읽어서 와야 해요
|
||||
#do1 do2 나눠야 해요
|
||||
|
||||
|
||||
|
||||
'''
|
||||
| AI1 | AI2 | DO1 | DO2 |
|
||||
Success | 0 | 0 | x | x |
|
||||
Success | 0 | 1 | x | x |
|
||||
Success | 1 | 0 | x | x |
|
||||
Success | 1 | 1 | x | x | => 유효한 데이터
|
||||
|
||||
|
||||
최소 한개 이상 실패 했을 때
|
||||
-> retry 해볼 것이냐
|
||||
|
||||
-> 데이터를 어떻게 할 것이냐
|
||||
-> 이전 데이터가 있다면, 이전 데이터를 가지고 더미 데이터로 사용하는 방법 => 안하기로 했었음
|
||||
'''
|
||||
timenow = int(time.time()*1000)
|
||||
isSuccess = True
|
||||
|
||||
# PORT A
|
||||
port_a_do_value = list(b[:16])
|
||||
try:
|
||||
a_ai_data=port_A_AI.read_registers(0x32, 32)
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_a_ai = a_ai_data
|
||||
|
||||
try:
|
||||
port_A_DO.write_bits(0, port_a_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
# PORT B
|
||||
port_b_do_value = list(b[17:32])
|
||||
try:
|
||||
b_ai_data=port_B_AI.read_registers(0x32, 32)
|
||||
prev_b_ai = b_ai_data
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_b_ai = b_ai_data
|
||||
|
||||
try:
|
||||
port_B_DO.write_bits(0, port_b_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
if isSuccess:
|
||||
queue_a.put([timenow,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([timenow,prev_b_ai, port_b_do_value])
|
||||
else:
|
||||
queue_a.put([0,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([0,prev_b_ai, port_b_do_value])
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# lock.release()
|
||||
|
||||
'''
|
||||
리스트를 생성, 10개를 딱 잘라서 어떻게 해야 할ㅈ지 모르겠음
|
||||
|
||||
|
||||
'''
|
||||
##데이터 생성 할 때
|
||||
# ai1, ai2
|
||||
# -> ai1 [32] -> [curr, volt, curr, volt ...]
|
||||
|
||||
'''
|
||||
data_for_list = {
|
||||
"slot" : 1,
|
||||
"timestamp": int(timenow*1000),
|
||||
"data":{
|
||||
"current": ai1,
|
||||
"volatge": ai2,
|
||||
"do1": value_list_ON,
|
||||
"err1": value_list_ON,
|
||||
"err2": value_list_ON
|
||||
#err1, 2
|
||||
}
|
||||
}
|
||||
lists.append(data_for_list)
|
||||
### 여기서 보냄
|
||||
# 10번 시그널 받으면
|
||||
#
|
||||
# list mqtt send
|
||||
# list clear
|
||||
if read_cnt_ch0 % 10 == 0:
|
||||
data = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003",
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"chamber":1,
|
||||
"list": lists
|
||||
}
|
||||
}
|
||||
|
||||
data_json_str = json.dumps(data, indent=0)
|
||||
publish_json_message(client, data_json_str)
|
||||
#print(data_json_str)
|
||||
# time.sleep(1)
|
||||
'''
|
||||
|
||||
|
||||
###############################################################################
|
||||
# data process thread #
|
||||
###############################################################################
|
||||
|
||||
|
||||
def data_process_thread(data_queue, ch, chamber):
|
||||
error_cnt_1 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
error_cnt_2 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
data_list_for_send_1=[]
|
||||
data_list_for_send_2=[]
|
||||
queue_count = 0
|
||||
queue_select_count = 0
|
||||
while isThreadRun:
|
||||
# 0.1s 마다 발생할 것으로 예상
|
||||
timestamp, ai, do = data_queue.get()
|
||||
|
||||
#==================================================
|
||||
do_temp = []
|
||||
for d in do:
|
||||
do_temp.append(int(d))
|
||||
do = do_temp.copy()
|
||||
#==================================================
|
||||
|
||||
|
||||
#print("timestamp: {timestamp}, \n ai: {ai}, \n do: {do}" .format(timestamp=timestamp, ai=ai, do=do))
|
||||
|
||||
#ai data -> current, voltage 전환
|
||||
queue_count = queue_count + 1
|
||||
current = []
|
||||
voltage = []
|
||||
ai_index = 0
|
||||
for i in ai:
|
||||
#짝수 current (확인 필요)
|
||||
ai_index = ai_index +1
|
||||
if (ai_index%2) == 0:
|
||||
current.append(int(i))
|
||||
else:
|
||||
voltage.append(int(i))
|
||||
|
||||
|
||||
#전압값으로 error count check
|
||||
voltage_cnt = 0
|
||||
for i in voltage:
|
||||
if i < 2:
|
||||
#count up
|
||||
error_cnt_1[voltage_cnt] = error_cnt_1[voltage_cnt] +1
|
||||
if error_cnt_1[voltage_cnt] == 10:
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
error_cnt_2[voltage_cnt] = error_cnt_2[voltage_cnt] + 1
|
||||
#shared memory do control modify
|
||||
#ch, tube number->off
|
||||
else:
|
||||
# count reset
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
|
||||
|
||||
|
||||
voltage_cnt = voltage_cnt + 1
|
||||
|
||||
# 로깅 기능을 넣어야 겠다...?
|
||||
# 파일 하나 열어서, 데이터를 쓴다
|
||||
|
||||
# 데이터 만들어서 전달
|
||||
if timestamp > 0:
|
||||
data = {
|
||||
"timestamp" : int(timestamp),
|
||||
"data": {
|
||||
"current" : current,
|
||||
"voltage" : voltage,
|
||||
"do" : do,
|
||||
"er1" : error_cnt_1,
|
||||
"er2" : error_cnt_2
|
||||
}
|
||||
}
|
||||
if(queue_select_count == 0):
|
||||
data_list_for_send_1.append(data)
|
||||
else:
|
||||
data_list_for_send_2.append(data)
|
||||
|
||||
|
||||
if queue_count == 10:
|
||||
queue_count = 0
|
||||
mqtt_msg = {}
|
||||
if (queue_select_count == 0):
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_1
|
||||
}
|
||||
}
|
||||
queue_select_count = 1
|
||||
data_list_for_send_2.clear()
|
||||
else:
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_2
|
||||
}
|
||||
}
|
||||
queue_select_count = 0
|
||||
data_list_for_send_1.clear()
|
||||
|
||||
|
||||
# print(type(mqtt_msg['data']['list'][0]['do'][0]))
|
||||
data_json_str = json.dumps(mqtt_msg, indent=4)
|
||||
# print(data_json_str)
|
||||
# print(data_json_str)
|
||||
publish_json_message(client, data_json_str)
|
||||
|
||||
##erro cnt check routine
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
#event는 개별 생성을 해준다 th1, th2
|
||||
|
||||
|
||||
def timer_event_loop(e1, e2):
|
||||
cnt = 0
|
||||
# global read_cnt
|
||||
|
||||
while True:
|
||||
# print("event set, meanning : periodic sensing")
|
||||
e1.set()
|
||||
e2.set()
|
||||
time.sleep(0.1)
|
||||
|
||||
#cnt = cnt +1
|
||||
#if cnt > 6000:
|
||||
# print("chip0 read count:", read_cnt_ch0)
|
||||
#print("\r\nchip1 read count:", read_cnt_ch0)
|
||||
#print("\r\nai1:", suc_cnt_ai, "\r\nai2:", suc_cnt_ai2)
|
||||
#print(ai2)
|
||||
#break
|
||||
|
||||
#print(cnt)
|
||||
# print(read_cnt)
|
||||
exit()
|
||||
# timer = threading.Timer(3, lambda: print("test event"))
|
||||
# timer.start()
|
||||
# timer.join()
|
||||
# # timer = threading.Timer(3, lambda: e.set())
|
||||
|
||||
|
||||
################################# 작성 중 #####################################
|
||||
# def publish_json_message(client, data):
|
||||
# topic = "devicedata/axr/nodeq1"
|
||||
# client.publish(topic, payload=data)
|
||||
|
||||
|
||||
# client = mqtt.Client("python_pub")
|
||||
# client.username_pw_set("sdt", "251327")
|
||||
# client.connect(host="13.209.39.139",port=32259)
|
||||
|
||||
# # get_value()
|
||||
|
||||
|
||||
# data = json.dumps(dict_1)
|
||||
# #publish_json_message(client, data)
|
||||
|
||||
# client.loop(2) # timeout = 2초
|
||||
|
||||
################################# 작성 중 ######################################
|
||||
|
||||
if __name__ == '__main__':
|
||||
###############################################################################
|
||||
# Queue x 4 max- infinite #
|
||||
###############################################################################
|
||||
|
||||
ch1_queue = queue.Queue()
|
||||
ch2_queue = queue.Queue()
|
||||
ch3_queue = queue.Queue()
|
||||
ch4_queue = queue.Queue()
|
||||
|
||||
chip0_evt = threading.Event()
|
||||
chip1_evt = threading.Event()
|
||||
|
||||
read_data_chip0 = threading.Thread(target=cwt_thread,args=(chip0_evt, 0, 1,2, 5,6, ch1_queue, ch2_queue)) #현재 4개씩 연결되어 있어서 테스트 용
|
||||
read_data_chip1 = threading.Thread(target=cwt_thread,args=(chip1_evt, 1, 9,10, 13,14, ch3_queue, ch4_queue))
|
||||
|
||||
data_process_ch1 = threading.Thread(target=data_process_thread,args=(ch1_queue, 1, 1))
|
||||
data_process_ch2 = threading.Thread(target=data_process_thread,args=(ch2_queue, 2, 1))
|
||||
data_process_ch3 = threading.Thread(target=data_process_thread,args=(ch3_queue, 3, 1))
|
||||
data_process_ch4 = threading.Thread(target=data_process_thread,args=(ch4_queue, 4, 1))
|
||||
|
||||
event_thread = threading.Thread(target=timer_event_loop, args=(chip0_evt,chip1_evt,))
|
||||
read_data_chip0.start()
|
||||
read_data_chip1.start()
|
||||
data_process_ch1.start()
|
||||
data_process_ch2.start()
|
||||
data_process_ch3.start()
|
||||
data_process_ch4.start()
|
||||
event_thread.start()
|
||||
|
|
@ -0,0 +1,493 @@
|
|||
|
||||
import threading
|
||||
import time
|
||||
import logging
|
||||
import serial
|
||||
import minimalmodbus
|
||||
import serial.rs485
|
||||
import subprocess
|
||||
import json
|
||||
import yaml
|
||||
import queue
|
||||
import paho.mqtt.client as mqtt
|
||||
import numpy as np
|
||||
from multiprocessing import shared_memory
|
||||
import argparse
|
||||
|
||||
|
||||
'''
|
||||
전달해야할 데이터 들
|
||||
mes code | 상태 | 전압 | 전류 | 4pin (DO) | ER1 | ER2
|
||||
tube 번호| 상태 | volt | curr | do | cnt | cnt
|
||||
|
||||
tube 번호: 1 - 128 , chamber / slot
|
||||
- slot(n) - tube(n)
|
||||
- 1-1 ~ 8-16 : 128개다
|
||||
|
||||
상태: 정상이냐, 초기화, 불량
|
||||
|
||||
ER1: 1초동안 판별, 판별할 동안 counting 할 예정 2V 이하라면 CNT UP
|
||||
if) er: 10이 되었음 (1초 유지) -> 0으로 변환, ER2 cnt up
|
||||
if) 2v 이상인 경우가 발생했다 -> 0으로 변환
|
||||
|
||||
ER2: OFF 횟수
|
||||
|
||||
'''
|
||||
|
||||
parser = argparse.ArgumentParser()
|
||||
parser.add_argument('-config',help='')
|
||||
args = parser.parse_args()
|
||||
|
||||
ROOT_PATH = f"/usr/local/sdt/app/{args.config}"
|
||||
DEVICE_PATH = f"/etc/sdt/device-control"
|
||||
|
||||
###############################################################################
|
||||
# JSON FILE READ #
|
||||
###############################################################################
|
||||
|
||||
with open(f"{ROOT_PATH}/connect_info.json","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
info = json.load(f)
|
||||
|
||||
with open(f"{DEVICE_PATH}/config.yaml","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
dev_info = yaml.load(f, Loader=yaml.FullLoader)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Shared memory setting #
|
||||
###############################################################################
|
||||
|
||||
|
||||
|
||||
with open(f"{ROOT_PATH}/config.json","r") as f:
|
||||
#with open(f"{args.config}/config.json","r") as f:
|
||||
data = json.load(f)
|
||||
|
||||
print(data)
|
||||
print(data["1"])
|
||||
|
||||
a = [ data[str(n+1)] for n in range(64)]
|
||||
a = np.array(a)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Get Data from Shared Memory #
|
||||
###############################################################################
|
||||
|
||||
shm = shared_memory.SharedMemory(create=True, size=a.nbytes, name="DO-shm")
|
||||
b = np.ndarray(a.shape, dtype=a.dtype, buffer=shm.buf)
|
||||
b[:] = a[:]
|
||||
|
||||
|
||||
###############################################################################
|
||||
# MQTT Broker Setting #
|
||||
###############################################################################
|
||||
|
||||
#MQTT_TOPIC = info['mqtt']['topic']
|
||||
MQTT_TOPIC = f"/device-data/{dev_info['assetcode']}"
|
||||
MQTT_ID = info['mqtt']['id']
|
||||
MQTT_PW = info['mqtt']['pw']
|
||||
MQTT_HOST_IP = info['mqtt']['host_ip']
|
||||
MQTT_PORT = info['mqtt']['port']
|
||||
|
||||
|
||||
def publish_json_message(client, data):
|
||||
topic = MQTT_TOPIC
|
||||
client.publish(topic, payload=data)
|
||||
|
||||
|
||||
client = mqtt.Client("python_pub")
|
||||
client.username_pw_set(MQTT_ID, MQTT_PW)
|
||||
client.connect(host=MQTT_HOST_IP,port=MQTT_PORT)
|
||||
|
||||
client.loop(2) # timeout = 2초
|
||||
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial setting #
|
||||
###############################################################################
|
||||
|
||||
_serial_port3 = serial.Serial("/dev/ttyMAX2", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port3.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port4 = serial.Serial("/dev/ttyMAX3", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port4.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial thread #
|
||||
###############################################################################
|
||||
isThreadRun = True
|
||||
|
||||
def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port_b_do_id, queue_a, queue_b):
|
||||
|
||||
print("index: ", chip_index)
|
||||
print("a-ai: %d, a-do: %d, b-ai: %d, b-do: %d " % (port_a_ai_id, port_a_do_id, port_b_ai_id, port_b_do_id))
|
||||
if chip_index == 0:
|
||||
serial_dev1 = "/dev/ttyMAX1"
|
||||
serial_dev2 = "/dev/ttyMAX0"
|
||||
else:
|
||||
serial_dev1 = "/dev/ttyMAX2"
|
||||
serial_dev2 = "/dev/ttyMAX3"
|
||||
|
||||
print(serial_dev1)
|
||||
print(serial_dev2)
|
||||
_serial_port_A = serial.Serial(serial_dev1, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_A.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port_B = serial.Serial(serial_dev2, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_B.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
port_A_AI = minimalmodbus.Instrument(serial_dev1, port_a_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_A_DO = minimalmodbus.Instrument(serial_dev1, port_a_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_AI = minimalmodbus.Instrument(serial_dev2, port_b_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_DO = minimalmodbus.Instrument(serial_dev2, port_b_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
|
||||
while isThreadRun:
|
||||
evt.wait()
|
||||
#print("read thread get even")
|
||||
evt.clear()
|
||||
|
||||
prev_a_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
prev_b_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
|
||||
#value list on -> do control data
|
||||
#추후에 do power on 할 리스트는 어디선가 읽어서 와야 해요
|
||||
#do1 do2 나눠야 해요
|
||||
|
||||
|
||||
|
||||
'''
|
||||
| AI1 | AI2 | DO1 | DO2 |
|
||||
Success | 0 | 0 | x | x |
|
||||
Success | 0 | 1 | x | x |
|
||||
Success | 1 | 0 | x | x |
|
||||
Success | 1 | 1 | x | x | => 유효한 데이터
|
||||
|
||||
|
||||
최소 한개 이상 실패 했을 때
|
||||
-> retry 해볼 것이냐
|
||||
|
||||
-> 데이터를 어떻게 할 것이냐
|
||||
-> 이전 데이터가 있다면, 이전 데이터를 가지고 더미 데이터로 사용하는 방법 => 안하기로 했었음
|
||||
'''
|
||||
timenow = int(time.time()*1000)
|
||||
isSuccess = True
|
||||
|
||||
# PORT A
|
||||
port_a_do_value = list(b[:16])
|
||||
try:
|
||||
a_ai_data=port_A_AI.read_registers(0x32, 32)
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_a_ai = a_ai_data
|
||||
|
||||
try:
|
||||
port_A_DO.write_bits(0, port_a_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
# PORT B
|
||||
port_b_do_value = list(b[17:32])
|
||||
try:
|
||||
b_ai_data=port_B_AI.read_registers(0x32, 32)
|
||||
prev_b_ai = b_ai_data
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_b_ai = b_ai_data
|
||||
|
||||
try:
|
||||
port_B_DO.write_bits(0, port_b_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
if isSuccess:
|
||||
queue_a.put([timenow,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([timenow,prev_b_ai, port_b_do_value])
|
||||
else:
|
||||
queue_a.put([0,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([0,prev_b_ai, port_b_do_value])
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# lock.release()
|
||||
|
||||
'''
|
||||
리스트를 생성, 10개를 딱 잘라서 어떻게 해야 할ㅈ지 모르겠음
|
||||
|
||||
|
||||
'''
|
||||
##데이터 생성 할 때
|
||||
# ai1, ai2
|
||||
# -> ai1 [32] -> [curr, volt, curr, volt ...]
|
||||
|
||||
'''
|
||||
data_for_list = {
|
||||
"slot" : 1,
|
||||
"timestamp": int(timenow*1000),
|
||||
"data":{
|
||||
"current": ai1,
|
||||
"volatge": ai2,
|
||||
"do1": value_list_ON,
|
||||
"err1": value_list_ON,
|
||||
"err2": value_list_ON
|
||||
#err1, 2
|
||||
}
|
||||
}
|
||||
lists.append(data_for_list)
|
||||
### 여기서 보냄
|
||||
# 10번 시그널 받으면
|
||||
#
|
||||
# list mqtt send
|
||||
# list clear
|
||||
if read_cnt_ch0 % 10 == 0:
|
||||
data = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003",
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"chamber":1,
|
||||
"list": lists
|
||||
}
|
||||
}
|
||||
|
||||
data_json_str = json.dumps(data, indent=0)
|
||||
publish_json_message(client, data_json_str)
|
||||
#print(data_json_str)
|
||||
# time.sleep(1)
|
||||
'''
|
||||
|
||||
|
||||
###############################################################################
|
||||
# data process thread #
|
||||
###############################################################################
|
||||
|
||||
|
||||
def data_process_thread(data_queue, ch, chamber):
|
||||
error_cnt_1 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
error_cnt_2 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
data_list_for_send_1=[]
|
||||
data_list_for_send_2=[]
|
||||
queue_count = 0
|
||||
queue_select_count = 0
|
||||
while isThreadRun:
|
||||
# 0.1s 마다 발생할 것으로 예상
|
||||
timestamp, ai, do = data_queue.get()
|
||||
|
||||
#==================================================
|
||||
do_temp = []
|
||||
for d in do:
|
||||
do_temp.append(int(d))
|
||||
do = do_temp.copy()
|
||||
#==================================================
|
||||
|
||||
|
||||
#print("timestamp: {timestamp}, \n ai: {ai}, \n do: {do}" .format(timestamp=timestamp, ai=ai, do=do))
|
||||
|
||||
#ai data -> current, voltage 전환
|
||||
queue_count = queue_count + 1
|
||||
current = []
|
||||
voltage = []
|
||||
ai_index = 0
|
||||
for i in ai:
|
||||
#짝수 current (확인 필요)
|
||||
ai_index = ai_index +1
|
||||
if (ai_index%2) == 0:
|
||||
current.append(int(i))
|
||||
else:
|
||||
voltage.append(int(i))
|
||||
|
||||
|
||||
#전압값으로 error count check
|
||||
voltage_cnt = 0
|
||||
for i in voltage:
|
||||
if i < 2:
|
||||
#count up
|
||||
error_cnt_1[voltage_cnt] = error_cnt_1[voltage_cnt] +1
|
||||
if error_cnt_1[voltage_cnt] == 10:
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
error_cnt_2[voltage_cnt] = error_cnt_2[voltage_cnt] + 1
|
||||
#shared memory do control modify
|
||||
#ch, tube number->off
|
||||
else:
|
||||
# count reset
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
|
||||
|
||||
|
||||
voltage_cnt = voltage_cnt + 1
|
||||
|
||||
# 로깅 기능을 넣어야 겠다...?
|
||||
# 파일 하나 열어서, 데이터를 쓴다
|
||||
|
||||
# 데이터 만들어서 전달
|
||||
if timestamp > 0:
|
||||
data = {
|
||||
"timestamp" : int(timestamp),
|
||||
"data": {
|
||||
"current" : current,
|
||||
"voltage" : voltage,
|
||||
"do" : do,
|
||||
"er1" : error_cnt_1,
|
||||
"er2" : error_cnt_2
|
||||
}
|
||||
}
|
||||
if(queue_select_count == 0):
|
||||
data_list_for_send_1.append(data)
|
||||
else:
|
||||
data_list_for_send_2.append(data)
|
||||
|
||||
|
||||
if queue_count == 10:
|
||||
queue_count = 0
|
||||
mqtt_msg = {}
|
||||
if (queue_select_count == 0):
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_1
|
||||
}
|
||||
}
|
||||
queue_select_count = 1
|
||||
data_list_for_send_2.clear()
|
||||
else:
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_2
|
||||
}
|
||||
}
|
||||
queue_select_count = 0
|
||||
data_list_for_send_1.clear()
|
||||
|
||||
|
||||
# print(type(mqtt_msg['data']['list'][0]['do'][0]))
|
||||
data_json_str = json.dumps(mqtt_msg, indent=4)
|
||||
# print(data_json_str)
|
||||
# print(data_json_str)
|
||||
publish_json_message(client, data_json_str)
|
||||
|
||||
##erro cnt check routine
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
#event는 개별 생성을 해준다 th1, th2
|
||||
|
||||
|
||||
def timer_event_loop(e1, e2):
|
||||
cnt = 0
|
||||
# global read_cnt
|
||||
|
||||
while True:
|
||||
# print("event set, meanning : periodic sensing")
|
||||
e1.set()
|
||||
e2.set()
|
||||
time.sleep(0.1)
|
||||
|
||||
#cnt = cnt +1
|
||||
#if cnt > 6000:
|
||||
# print("chip0 read count:", read_cnt_ch0)
|
||||
#print("\r\nchip1 read count:", read_cnt_ch0)
|
||||
#print("\r\nai1:", suc_cnt_ai, "\r\nai2:", suc_cnt_ai2)
|
||||
#print(ai2)
|
||||
#break
|
||||
|
||||
#print(cnt)
|
||||
# print(read_cnt)
|
||||
exit()
|
||||
# timer = threading.Timer(3, lambda: print("test event"))
|
||||
# timer.start()
|
||||
# timer.join()
|
||||
# # timer = threading.Timer(3, lambda: e.set())
|
||||
|
||||
|
||||
################################# 작성 중 #####################################
|
||||
# def publish_json_message(client, data):
|
||||
# topic = "devicedata/axr/nodeq1"
|
||||
# client.publish(topic, payload=data)
|
||||
|
||||
|
||||
# client = mqtt.Client("python_pub")
|
||||
# client.username_pw_set("sdt", "251327")
|
||||
# client.connect(host="13.209.39.139",port=32259)
|
||||
|
||||
# # get_value()
|
||||
|
||||
|
||||
# data = json.dumps(dict_1)
|
||||
# #publish_json_message(client, data)
|
||||
|
||||
# client.loop(2) # timeout = 2초
|
||||
|
||||
################################# 작성 중 ######################################
|
||||
|
||||
if __name__ == '__main__':
|
||||
###############################################################################
|
||||
# Queue x 4 max- infinite #
|
||||
###############################################################################
|
||||
|
||||
ch1_queue = queue.Queue()
|
||||
ch2_queue = queue.Queue()
|
||||
ch3_queue = queue.Queue()
|
||||
ch4_queue = queue.Queue()
|
||||
|
||||
chip0_evt = threading.Event()
|
||||
chip1_evt = threading.Event()
|
||||
|
||||
read_data_chip0 = threading.Thread(target=cwt_thread,args=(chip0_evt, 0, 1,2, 5,6, ch1_queue, ch2_queue)) #현재 4개씩 연결되어 있어서 테스트 용
|
||||
read_data_chip1 = threading.Thread(target=cwt_thread,args=(chip1_evt, 1, 9,10, 13,14, ch3_queue, ch4_queue))
|
||||
|
||||
data_process_ch1 = threading.Thread(target=data_process_thread,args=(ch1_queue, 1, 1))
|
||||
data_process_ch2 = threading.Thread(target=data_process_thread,args=(ch2_queue, 2, 1))
|
||||
data_process_ch3 = threading.Thread(target=data_process_thread,args=(ch3_queue, 3, 1))
|
||||
data_process_ch4 = threading.Thread(target=data_process_thread,args=(ch4_queue, 4, 1))
|
||||
|
||||
event_thread = threading.Thread(target=timer_event_loop, args=(chip0_evt,chip1_evt,))
|
||||
read_data_chip0.start()
|
||||
read_data_chip1.start()
|
||||
data_process_ch1.start()
|
||||
data_process_ch2.start()
|
||||
data_process_ch3.start()
|
||||
data_process_ch4.start()
|
||||
event_thread.start()
|
||||
|
|
@ -0,0 +1,493 @@
|
|||
|
||||
import threading
|
||||
import time
|
||||
import logging
|
||||
import serial
|
||||
import minimalmodbus
|
||||
import serial.rs485
|
||||
import subprocess
|
||||
import json
|
||||
import yaml
|
||||
import queue
|
||||
import paho.mqtt.client as mqtt
|
||||
import numpy as np
|
||||
from multiprocessing import shared_memory
|
||||
import argparse
|
||||
|
||||
|
||||
'''
|
||||
전달해야할 데이터 들
|
||||
mes code | 상태 | 전압 | 전류 | 4pin (DO) | ER1 | ER2
|
||||
tube 번호| 상태 | volt | curr | do | cnt | cnt
|
||||
|
||||
tube 번호: 1 - 128 , chamber / slot
|
||||
- slot(n) - tube(n)
|
||||
- 1-1 ~ 8-16 : 128개다
|
||||
|
||||
상태: 정상이냐, 초기화, 불량
|
||||
|
||||
ER1: 1초동안 판별, 판별할 동안 counting 할 예정 2V 이하라면 CNT UP
|
||||
if) er: 10이 되었음 (1초 유지) -> 0으로 변환, ER2 cnt up
|
||||
if) 2v 이상인 경우가 발생했다 -> 0으로 변환
|
||||
|
||||
ER2: OFF 횟수
|
||||
|
||||
'''
|
||||
|
||||
parser = argparse.ArgumentParser()
|
||||
parser.add_argument('-config',help='')
|
||||
args = parser.parse_args()
|
||||
|
||||
ROOT_PATH = f"/usr/local/sdt/app/{args.config}"
|
||||
DEVICE_PATH = f"/etc/sdt/device-control"
|
||||
|
||||
###############################################################################
|
||||
# JSON FILE READ #
|
||||
###############################################################################
|
||||
|
||||
with open(f"{ROOT_PATH}/connect_info.json","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
info = json.load(f)
|
||||
|
||||
with open(f"{DEVICE_PATH}/config.yaml","r") as f:
|
||||
#with open(f"{args.config}/connect_info.json","r") as f:
|
||||
dev_info = yaml.load(f, Loader=yaml.FullLoader)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Shared memory setting #
|
||||
###############################################################################
|
||||
|
||||
|
||||
|
||||
with open(f"{ROOT_PATH}/config.json","r") as f:
|
||||
#with open(f"{args.config}/config.json","r") as f:
|
||||
data = json.load(f)
|
||||
|
||||
print(data)
|
||||
print(data["1"])
|
||||
|
||||
a = [ data[str(n+1)] for n in range(64)]
|
||||
a = np.array(a)
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Get Data from Shared Memory #
|
||||
###############################################################################
|
||||
|
||||
shm = shared_memory.SharedMemory(create=True, size=a.nbytes, name="DO-shm")
|
||||
b = np.ndarray(a.shape, dtype=a.dtype, buffer=shm.buf)
|
||||
b[:] = a[:]
|
||||
|
||||
|
||||
###############################################################################
|
||||
# MQTT Broker Setting #
|
||||
###############################################################################
|
||||
|
||||
#MQTT_TOPIC = info['mqtt']['topic']
|
||||
MQTT_TOPIC = f"/device-data/{dev_info['assetcode']}"
|
||||
MQTT_ID = info['mqtt']['id']
|
||||
MQTT_PW = info['mqtt']['pw']
|
||||
MQTT_HOST_IP = info['mqtt']['host_ip']
|
||||
MQTT_PORT = info['mqtt']['port']
|
||||
|
||||
|
||||
def publish_json_message(client, data):
|
||||
topic = MQTT_TOPIC
|
||||
client.publish(topic, payload=data)
|
||||
|
||||
|
||||
client = mqtt.Client("python_pub")
|
||||
client.username_pw_set(MQTT_ID, MQTT_PW)
|
||||
client.connect(host=MQTT_HOST_IP,port=MQTT_PORT)
|
||||
|
||||
client.loop(2) # timeout = 2초
|
||||
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial setting #
|
||||
###############################################################################
|
||||
|
||||
_serial_port3 = serial.Serial("/dev/ttyMAX2", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port3.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port4 = serial.Serial("/dev/ttyMAX3", 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port4.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Serial thread #
|
||||
###############################################################################
|
||||
isThreadRun = True
|
||||
|
||||
def cwt_thread(evt, chip_index, port_a_ai_id , port_a_do_id, port_b_ai_id , port_b_do_id, queue_a, queue_b):
|
||||
|
||||
print("index: ", chip_index)
|
||||
print("a-ai: %d, a-do: %d, b-ai: %d, b-do: %d " % (port_a_ai_id, port_a_do_id, port_b_ai_id, port_b_do_id))
|
||||
if chip_index == 0:
|
||||
serial_dev1 = "/dev/ttyMAX1"
|
||||
serial_dev2 = "/dev/ttyMAX0"
|
||||
else:
|
||||
serial_dev1 = "/dev/ttyMAX2"
|
||||
serial_dev2 = "/dev/ttyMAX3"
|
||||
|
||||
print(serial_dev1)
|
||||
print(serial_dev2)
|
||||
_serial_port_A = serial.Serial(serial_dev1, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_A.rs485_mode = serial.rs485.RS485Settings()
|
||||
_serial_port_B = serial.Serial(serial_dev2, 115200, parity= serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, bytesize=serial.EIGHTBITS, timeout = 1, rtscts=True)
|
||||
_serial_port_B.rs485_mode = serial.rs485.RS485Settings()
|
||||
|
||||
|
||||
port_A_AI = minimalmodbus.Instrument(serial_dev1, port_a_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_A_DO = minimalmodbus.Instrument(serial_dev1, port_a_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_A_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_AI = minimalmodbus.Instrument(serial_dev2, port_b_ai_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_AI.serial.baudrate = 115200 # baudrate
|
||||
|
||||
port_B_DO = minimalmodbus.Instrument(serial_dev2, port_b_do_id, debug=False, close_port_after_each_call=False) # port name, slave address (in decimal)
|
||||
port_B_DO.serial.baudrate = 115200 # baudrate
|
||||
|
||||
|
||||
while isThreadRun:
|
||||
evt.wait()
|
||||
#print("read thread get even")
|
||||
evt.clear()
|
||||
|
||||
prev_a_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
prev_b_ai = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
|
||||
#value list on -> do control data
|
||||
#추후에 do power on 할 리스트는 어디선가 읽어서 와야 해요
|
||||
#do1 do2 나눠야 해요
|
||||
|
||||
|
||||
|
||||
'''
|
||||
| AI1 | AI2 | DO1 | DO2 |
|
||||
Success | 0 | 0 | x | x |
|
||||
Success | 0 | 1 | x | x |
|
||||
Success | 1 | 0 | x | x |
|
||||
Success | 1 | 1 | x | x | => 유효한 데이터
|
||||
|
||||
|
||||
최소 한개 이상 실패 했을 때
|
||||
-> retry 해볼 것이냐
|
||||
|
||||
-> 데이터를 어떻게 할 것이냐
|
||||
-> 이전 데이터가 있다면, 이전 데이터를 가지고 더미 데이터로 사용하는 방법 => 안하기로 했었음
|
||||
'''
|
||||
timenow = int(time.time()*1000)
|
||||
isSuccess = True
|
||||
|
||||
# PORT A
|
||||
port_a_do_value = list(b[:16])
|
||||
try:
|
||||
a_ai_data=port_A_AI.read_registers(0x32, 32)
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_a_ai = a_ai_data
|
||||
|
||||
try:
|
||||
port_A_DO.write_bits(0, port_a_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
# PORT B
|
||||
port_b_do_value = list(b[17:32])
|
||||
try:
|
||||
b_ai_data=port_B_AI.read_registers(0x32, 32)
|
||||
prev_b_ai = b_ai_data
|
||||
# suc_cnt_ai = suc_cnt_ai +1
|
||||
except:
|
||||
isSuccess = False
|
||||
|
||||
if isSuccess:
|
||||
prev_b_ai = b_ai_data
|
||||
|
||||
try:
|
||||
port_B_DO.write_bits(0, port_b_do_value)
|
||||
# suc_cnt_do = suc_cnt_do +1
|
||||
except:
|
||||
None
|
||||
|
||||
if isSuccess:
|
||||
queue_a.put([timenow,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([timenow,prev_b_ai, port_b_do_value])
|
||||
else:
|
||||
queue_a.put([0,prev_a_ai, port_a_do_value])
|
||||
queue_b.put([0,prev_b_ai, port_b_do_value])
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# lock.release()
|
||||
|
||||
'''
|
||||
리스트를 생성, 10개를 딱 잘라서 어떻게 해야 할ㅈ지 모르겠음
|
||||
|
||||
|
||||
'''
|
||||
##데이터 생성 할 때
|
||||
# ai1, ai2
|
||||
# -> ai1 [32] -> [curr, volt, curr, volt ...]
|
||||
|
||||
'''
|
||||
data_for_list = {
|
||||
"slot" : 1,
|
||||
"timestamp": int(timenow*1000),
|
||||
"data":{
|
||||
"current": ai1,
|
||||
"volatge": ai2,
|
||||
"do1": value_list_ON,
|
||||
"err1": value_list_ON,
|
||||
"err2": value_list_ON
|
||||
#err1, 2
|
||||
}
|
||||
}
|
||||
lists.append(data_for_list)
|
||||
### 여기서 보냄
|
||||
# 10번 시그널 받으면
|
||||
#
|
||||
# list mqtt send
|
||||
# list clear
|
||||
if read_cnt_ch0 % 10 == 0:
|
||||
data = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003",
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"chamber":1,
|
||||
"list": lists
|
||||
}
|
||||
}
|
||||
|
||||
data_json_str = json.dumps(data, indent=0)
|
||||
publish_json_message(client, data_json_str)
|
||||
#print(data_json_str)
|
||||
# time.sleep(1)
|
||||
'''
|
||||
|
||||
|
||||
###############################################################################
|
||||
# data process thread #
|
||||
###############################################################################
|
||||
|
||||
|
||||
def data_process_thread(data_queue, ch, chamber):
|
||||
error_cnt_1 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
error_cnt_2 = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
|
||||
data_list_for_send_1=[]
|
||||
data_list_for_send_2=[]
|
||||
queue_count = 0
|
||||
queue_select_count = 0
|
||||
while isThreadRun:
|
||||
# 0.1s 마다 발생할 것으로 예상
|
||||
timestamp, ai, do = data_queue.get()
|
||||
|
||||
#==================================================
|
||||
do_temp = []
|
||||
for d in do:
|
||||
do_temp.append(int(d))
|
||||
do = do_temp.copy()
|
||||
#==================================================
|
||||
|
||||
|
||||
#print("timestamp: {timestamp}, \n ai: {ai}, \n do: {do}" .format(timestamp=timestamp, ai=ai, do=do))
|
||||
|
||||
#ai data -> current, voltage 전환
|
||||
queue_count = queue_count + 1
|
||||
current = []
|
||||
voltage = []
|
||||
ai_index = 0
|
||||
for i in ai:
|
||||
#짝수 current (확인 필요)
|
||||
ai_index = ai_index +1
|
||||
if (ai_index%2) == 0:
|
||||
current.append(int(i))
|
||||
else:
|
||||
voltage.append(int(i))
|
||||
|
||||
|
||||
#전압값으로 error count check
|
||||
voltage_cnt = 0
|
||||
for i in voltage:
|
||||
if i < 2:
|
||||
#count up
|
||||
error_cnt_1[voltage_cnt] = error_cnt_1[voltage_cnt] +1
|
||||
if error_cnt_1[voltage_cnt] == 10:
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
error_cnt_2[voltage_cnt] = error_cnt_2[voltage_cnt] + 1
|
||||
#shared memory do control modify
|
||||
#ch, tube number->off
|
||||
else:
|
||||
# count reset
|
||||
error_cnt_1[voltage_cnt] = 0
|
||||
|
||||
|
||||
|
||||
voltage_cnt = voltage_cnt + 1
|
||||
|
||||
# 로깅 기능을 넣어야 겠다...?
|
||||
# 파일 하나 열어서, 데이터를 쓴다
|
||||
|
||||
# 데이터 만들어서 전달
|
||||
if timestamp > 0:
|
||||
data = {
|
||||
"timestamp" : int(timestamp),
|
||||
"data": {
|
||||
"current" : current,
|
||||
"voltage" : voltage,
|
||||
"do" : do,
|
||||
"er1" : error_cnt_1,
|
||||
"er2" : error_cnt_2
|
||||
}
|
||||
}
|
||||
if(queue_select_count == 0):
|
||||
data_list_for_send_1.append(data)
|
||||
else:
|
||||
data_list_for_send_2.append(data)
|
||||
|
||||
|
||||
if queue_count == 10:
|
||||
queue_count = 0
|
||||
mqtt_msg = {}
|
||||
if (queue_select_count == 0):
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_1
|
||||
}
|
||||
}
|
||||
queue_select_count = 1
|
||||
data_list_for_send_2.clear()
|
||||
else:
|
||||
mqtt_msg = {
|
||||
"modelCode":"test4",
|
||||
"assetCode":"NQ-R04-TEST-003", #나중에는 config에서 셋팅되는 값, or model 값으로 변경 (asset)
|
||||
"dataType":"DATA",
|
||||
"data": {
|
||||
"channel": ch, # 채널 입력 받자
|
||||
"chamber":chamber, #chamber 도 입력 받자
|
||||
"slot": ch, #슬롯 값은 chamber와 ch 값으로 만든다
|
||||
"list": data_list_for_send_2
|
||||
}
|
||||
}
|
||||
queue_select_count = 0
|
||||
data_list_for_send_1.clear()
|
||||
|
||||
|
||||
# print(type(mqtt_msg['data']['list'][0]['do'][0]))
|
||||
data_json_str = json.dumps(mqtt_msg, indent=4)
|
||||
# print(data_json_str)
|
||||
# print(data_json_str)
|
||||
publish_json_message(client, data_json_str)
|
||||
|
||||
##erro cnt check routine
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
######################################### thread 함수 작성 ################################################
|
||||
|
||||
|
||||
#event는 개별 생성을 해준다 th1, th2
|
||||
|
||||
|
||||
def timer_event_loop(e1, e2):
|
||||
cnt = 0
|
||||
# global read_cnt
|
||||
|
||||
while True:
|
||||
# print("event set, meanning : periodic sensing")
|
||||
e1.set()
|
||||
e2.set()
|
||||
time.sleep(0.1)
|
||||
|
||||
#cnt = cnt +1
|
||||
#if cnt > 6000:
|
||||
# print("chip0 read count:", read_cnt_ch0)
|
||||
#print("\r\nchip1 read count:", read_cnt_ch0)
|
||||
#print("\r\nai1:", suc_cnt_ai, "\r\nai2:", suc_cnt_ai2)
|
||||
#print(ai2)
|
||||
#break
|
||||
|
||||
#print(cnt)
|
||||
# print(read_cnt)
|
||||
exit()
|
||||
# timer = threading.Timer(3, lambda: print("test event"))
|
||||
# timer.start()
|
||||
# timer.join()
|
||||
# # timer = threading.Timer(3, lambda: e.set())
|
||||
|
||||
|
||||
################################# 작성 중 #####################################
|
||||
# def publish_json_message(client, data):
|
||||
# topic = "devicedata/axr/nodeq1"
|
||||
# client.publish(topic, payload=data)
|
||||
|
||||
|
||||
# client = mqtt.Client("python_pub")
|
||||
# client.username_pw_set("sdt", "251327")
|
||||
# client.connect(host="13.209.39.139",port=32259)
|
||||
|
||||
# # get_value()
|
||||
|
||||
|
||||
# data = json.dumps(dict_1)
|
||||
# #publish_json_message(client, data)
|
||||
|
||||
# client.loop(2) # timeout = 2초
|
||||
|
||||
################################# 작성 중 ######################################
|
||||
|
||||
if __name__ == '__main__':
|
||||
###############################################################################
|
||||
# Queue x 4 max- infinite #
|
||||
###############################################################################
|
||||
|
||||
ch1_queue = queue.Queue()
|
||||
ch2_queue = queue.Queue()
|
||||
ch3_queue = queue.Queue()
|
||||
ch4_queue = queue.Queue()
|
||||
|
||||
chip0_evt = threading.Event()
|
||||
chip1_evt = threading.Event()
|
||||
|
||||
read_data_chip0 = threading.Thread(target=cwt_thread,args=(chip0_evt, 0, 1,2, 5,6, ch1_queue, ch2_queue)) #현재 4개씩 연결되어 있어서 테스트 용
|
||||
read_data_chip1 = threading.Thread(target=cwt_thread,args=(chip1_evt, 1, 9,10, 13,14, ch3_queue, ch4_queue))
|
||||
|
||||
data_process_ch1 = threading.Thread(target=data_process_thread,args=(ch1_queue, 1, 1))
|
||||
data_process_ch2 = threading.Thread(target=data_process_thread,args=(ch2_queue, 2, 1))
|
||||
data_process_ch3 = threading.Thread(target=data_process_thread,args=(ch3_queue, 3, 1))
|
||||
data_process_ch4 = threading.Thread(target=data_process_thread,args=(ch4_queue, 4, 1))
|
||||
|
||||
event_thread = threading.Thread(target=timer_event_loop, args=(chip0_evt,chip1_evt,))
|
||||
read_data_chip0.start()
|
||||
read_data_chip1.start()
|
||||
data_process_ch1.start()
|
||||
data_process_ch2.start()
|
||||
data_process_ch3.start()
|
||||
data_process_ch4.start()
|
||||
event_thread.start()
|
||||
|
|
@ -4,6 +4,7 @@ pip install -r requirements.txt
|
|||
sudo sed -i "s/appName/$1/g" /usr/local/sdt/app/$1/AWX_collector.service
|
||||
sudo cp /usr/local/sdt/app/$1/AWX_collector.service /etc/systemd/system/$1.service
|
||||
|
||||
sudo sed -i "s/appName/$1/g" /usr/local/sdt/app/$1/AWX_shm_updater.service
|
||||
sudo cp /usr/local/sdt/app/$1/AWX_shm_updater.service /etc/systemd/system/AWX_shm_updater.service
|
||||
sudo systemctl start $1
|
||||
sudo systemctl enable $1
|
||||
|
|
|
|||
Loading…
Reference in New Issue