bwc-management/bwc-management.service

@@ -1,10 +0,0 @@
-[Unit]
-Description=When change project code, it manage blokwork clients.
-
-[Service]
-ExecStart=/usr/local/bin/bwc-management -mqtt=aws
-Restart=always
-RestartSec=10
-
-[Install]
-WantedBy=multi-user.target

bwc-management/install.sh

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-sudo cp bwc-management /usr/local/bin/
-sudo cp bwc-management.service /etc/systemd/system/
-sudo systemctl start bwc-management
-sudo systemctl enable bwc-management

device-control/config.json

@@ -1,8 +0,0 @@
-{
-    "assetcode": "acode",
-    "devicetype": "typecode",
-    "mqtturl": "tcp://43.200.53.170:32259",
-    "projectcode": "no_project",
-    "reboot": "",
-    "requestid": ""
-}

device-control/config.yaml

@@ -0,0 +1,3 @@
+assetcode: acode
+devicetype: typecode
+mqtturl: tcp://13.209.39.139:32259

device-control/device-control.service

@@ -1,8 +1,8 @@
 [Unit]
-Description=It control device. There are device's bash, systemd, app's management, json edit.
+Description=device-control
 
 [Service]
-ExecStart=/usr/local/bin/device-control -mqtt=aws
+ExecStart=/usr/local/bin/device-control
 Restart=always
 RestartSec=10
 

device-control/install.sh

@@ -1,9 +1,9 @@
 #!/bin/bash
 
-# sudo mkdir -p /etc/sdt/device.config
+sudo mkdir -p /etc/sdt/device-control
-sudo cp config.json /etc/sdt/device.config/config.json
+sudo cp config.yaml /etc/sdt/device-control
-sudo sed -i "s/acode/$1/g" /etc/sdt/device.config/config.json
+sudo sed -i "s/acode/$1/g" /etc/sdt/device-control/config.yaml
-sudo sed -i "s/typecode/$2/g" /etc/sdt/device.config/config.json
+sudo sed -i "s/typecode/$2/g" /etc/sdt/device-control/config.yaml
 sudo cp device-control /usr/local/bin/
 sudo cp device-control.service /etc/systemd/system/
 sudo systemctl start device-control

device-health/config.yaml

@@ -0,0 +1,2 @@
+assetcode: acode
+mqtturl: tcp://13.209.39.139:32259

device-health/device-health.service

@@ -1,9 +1,9 @@
 [Unit]
-Description=It get device's health. There is cpu, memory, network up/downlink, network interface, etc.
+Description=DeviceHealth
 
 [Service]
 User=root
-ExecStart=/usr/local/bin/device-health -mqtt=aws
+ExecStart=/usr/local/bin/device-health
 Restart=always
 RestartSec=10
 

device-health/install.sh

@@ -1,6 +1,8 @@
 #!/bin/bash
 
-# sudo mkdir -p /etc/sdt/device-health
+sudo mkdir -p /etc/sdt/device-health
+sudo cp config.yaml /etc/sdt/device-health/
+sudo sed -i "s/acode/$1/g" /etc/sdt/device-health/config.yaml
 sudo cp device-health /usr/local/bin/
 sudo cp device-health.service /etc/systemd/system/
 sudo systemctl start device-health

heartbeat/device-heartbeat.service

@@ -1,9 +1,9 @@
 [Unit]
-Description=It send heatbeat to BlokWorks.
+Description=DeviceHearthBeat
 
 [Service]
 User=root
-ExecStart=/usr/local/bin/device-heartbeat -mqtt=aws
+ExecStart=/usr/local/bin/device-heartbeat
 Restart=always
 RestartSec=10
 

heartbeat/install.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# sudo mkdir -p /etc/sdt/device-heartbeat
 sudo cp device-heartbeat /usr/local/bin/
 sudo cp device-heartbeat.service /etc/systemd/system/
 sudo systemctl start device-heartbeat

init.sh

@@ -5,11 +5,10 @@ set -e
 if [ $(id -u) -ne 0 ]; then
 	echo "Please run as root. - sudo su"
 	exit
-else
+elif [ $1 == "help" ]; then
     echo "Please input parameter. follow as:"
-    echo "Organzation ID=58a311aa-f52a-40e3-af44-cdec82b9d0b7"
+    echo "Example) Organzation ID=58a311aa-f52a-40e3-af44-cdec82b9d0b7 SerialNumbe=ECN-SJ-TEST-001 Type=ecn"
-    echo "SerialNumber=ECN-SJ-TEST-001"
+    exit
-    echo "Type=ecn"
 fi
 
 echo "If you need help, please enter follow as:"
@@ -18,11 +17,6 @@ read -p "Organzation ID(58a311aa-f52a-40e3-af44-cdec82b9d0b7): " oid
 read -p "Serial Number(ECN-SJ-TEST-001): " acode
 read -p "Type(ecn or nodeq): " etype
 
-echo "[INIT] [0] Init equipment registration"
-mkdir -p /etc/sdt/device.config
-mkdir -p /etc/sdt/device.logs
-echo "[INIT] [0] Finish init equipment registration"
-
 echo "[INIT] [1] Start equipment registration"
 ./bwc-init -oid=$oid -acode=$acode
 echo "[INIT] [1] Finish equipment registration"
@@ -46,9 +40,4 @@ echo "[INIT] [4] Finish install device-heartbeat"
 echo "[INIT] [5] Start install process-checker"
 cd ../process-checker
 ./install.sh
-echo "[INIT] [5] Stop install process-checker"
+echo "[INIT] [5] Stop install process-checker"
-
-echo "[INIT] [6] Start install bwc-management"
-cd ../bwc-management
-./install.sh
-echo "[INIT] [6] Stop install bwc-management"

process-checker/install.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# sudo mkdir -p /etc/sdt/process-checker
 sudo cp process-checker /usr/local/bin/
 sudo cp process-checker.service /etc/systemd/system/
 sudo systemctl start process-checker

process-checker/process-checker.service

@@ -1,9 +1,9 @@
 [Unit]
-Description=It get app's health. There is cpu, memory, app's PID, app's status.
+Description=processchecker
 
 [Service]
 User=root
-ExecStart=/usr/local/bin/process-checker -mqtt=aws
+ExecStart=/usr/local/bin/process-checker
 Restart=always
 RestartSec=10
 

uninstall.sh

@@ -37,12 +37,5 @@ rm /etc/systemd/system/process-checker.service
 rm /usr/local/bin/process-checker
 echo "[INIT] Finish uninstall process-checker"
 
-echo "[INIT] Start uninstall bwc-management"
+echo "[INIT] Delete Cert Data"
-systemctl disable bwc-management
+rm -rf /etc/sdt/cert
-systemctl stop bwc-management
-rm /etc/systemd/system/bwc-management.service
-rm /usr/local/bin/bwc-management
-echo "[INIT] Finish uninstall bwc-management"
-
-echo "[INIT] Delete Cert, Config, Log Data"
-rm -rf /etc/sdt